The Kununurra is based off a traditional Chelsea boot, but modernised with a narrow square toe and handcrafted in velvety-soft Nubuck leather, providing a softer lighter feel. Built for reliability and comfort, the Kununurra boot is constructed with a Goodyear welt for durability, while the rubber sole provides an extremely comfortable footprint thanks to an inner cork filling that adapts to each foot with wear. The full glove leather lining allows your feet to breathe and absorbs moisture, providing all-day comfort. The boot opening is slightly above ankle height with elasticated side panels making for an easy slip-on fit.
Please keep in mind that all size charts and information are generalised, due to the handcrafted nature of our boots, each pair differs slightly in sizing may vary from boot to boot.
Always read specific boot description fitting notes for extra boot fit information.
WOMENS | US | 5 | 5.5 | 6 | 6.5 | 7 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | – | 12 |
AU | 5 | 5.5 | 6 | 6.5 | 7 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | – | 12 | |
EU | 35.5 | 36 | 36.5 | 37 | 37.5 | 38 | 38.5 | 39 | 40 | 40.5 | 41 | 42 | 42.5 | – | 43 |
MENS | US | 5 | 5.5 | 6 | 6.5 | 7 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | 13 | 14 |
AU | 4 | 4.5 | 5 | 5.5 | 6 | 6.5 | 7 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 12 | 13 | |
EU | 36 | 36.5 | 37 | 38 | 39 | 40 | 41 | 41.5 | 42 | 42.5 | 43 | 44 | 44.5 | 45 | 46 | 47 | 48 |
Note: New boots fit snugly at the instep, arch and ball of foot. Heel slippage is normal for a good fit. Boots will ‘break in’ and conform to your foot. If the boots feel too tight, go for a wider width. If the boots feel too loose, try half a size smaller.
Fitting your boots
Boots fir true to US standard sizing.
Due to the handcrafted nature of our boots, each pair differs slightly. Always read specific boot description fitting notes for extra boot fit information.
Step 1
Boots MUST be tried on indoors on a carpeted floor. Try your boots on with the thickness of socks that you plan on wearing. It is much easier to pull your boots on when you are seated. You should hear a soft “THUNK” when your foot settles into the boot. Some resistance is formal.
Step 2
They should feel snug, but not uncomfortable. The leather will stretch with wear. Boots should slip slightly in the heel, slight slippage is necessary to obtain proper fit. After wearing boots a few times and flexing the outsole, most of the slippage will disappear and conform to the shape of your foot, providing a comfortable fit. Be patient, the more you wear your boots the better! To test the toe box area for fit, wiggle your toes, they should be able to move easily inside the boot.
Step 3
Walk around on the carpet. Try on both boots – your feet may be two different sizes.
Note: New boots fit snugly, boots will ‘break in’, stretch and conform to your foot.
If sold out please contact Muster HQ on 03 5881 3388.